MR33 NeoPit Car Stand Adapter for SkyRc Neo Heating Station

Get your pit setup ready for every season! With our new MR33 NeoPit, you can connect your MR33 Carstand (MR33-252011) to the SkyRC Neo tyre warmers (600157-01) in a flash – unbeatable in summer. 

And in winter? Simply disconnect it and use your Carstand as usual (without the heating station). 

The best part: With the MR33 NeoPit, you can use your existing 2S LiPo batteries up to 25 mm in height directly for the tyre warmers – no extra batteries needed. At the workbench, you power the unit via mains supply, and when it’s time to head to the track, simply plug in the LiPo, take the unit with you and keep heating right until the end!

IMPORTANT: The tyre heating station and the MR33 Car Stand are NOT included in the scope of delivery. 

ASSEMBLY 

• Remove the four M2 screws (on the side) from the heating station housing.
• Screw the heating station to the NeoPit using the four long M2 screws provided. The Allen key can be inserted through the openings in the NeoPit (with the screw).
• Carefully insert the MR33 Car Stand into the openings from above and secure it from below using the four M3 screws.
• If desired, insert a 2S battery (maximum height 25mm) and secure it with the two grub screws (visible when viewed from the front, to the left and right of the heating station) (do not overtighten). First, plug a cable with an XT60 connector into the battery and then connect it to the heating station!