eXcelerate Prodigy Multi Tool

The Prodigy Multi Tool is the perfect weapon for working on your Prodigy on-road cars.

Front Kingpin Camber Adjustment:

The tool includes a 1.5mm pin for aligning the front carbon/kingpin holes to set camber. There is an additional camber adjustment tool that keys into the kingpin when you have the front end on set-up blocks or setup wheels - DO NOT ADJUST THE KINGPIN WITH THE KINGPIN SCREW TIGHT. Have the kingpin "snug" where you can adjust the camber to your precise desired setting. If the kingpin is tightened down too much, you will damage the tool. After setting the camber, then tighten using shock shaft pliers.

The Multi tool also includes the hex for changing spur gears as well has a cutout on the oposite end perfect for adjusting the tie-rods. The hole right above the tie-rod cut out is for holding the ball cup and there are 4mm and 5mm hexes for holding bullet plugs for soldering.